How to read a scale bar
A scale bar connects a measured length on paper to a distance in the drawing. Read the number at the end of the bar and its unit label together. Intermediate ticks divide that distance into smaller lengths. You can compare an object in the drawing with those divisions to estimate its size without converting the printed scale ratio in your head.
Enter the total represented distance in metres or feet. Segment count divides that total into equal parts. Subdivisions add smaller marks inside the first segment, starting at zero. This maker keeps zero at the left end. If you need a scale with a divided segment to the left of zero, edit the exported vector geometry and relabel it carefully.
Match the drawing scale
In true printed length mode, the chosen drawing scale determines the bar width. At 1:100, one metre is ten millimetres on paper, so a bar representing ten metres is one hundred millimetres long. The scale applies to the drawing geometry. Symbols, titles and labels usually have their own paper sizes so they remain readable.
Architectural imperial scales express inches on paper per foot in the drawing. Engineering scales express one paper inch as a distance in feet. Choose the convention shown in your viewport settings and keep the represented distance in feet. Check one known dimension after you place the export. A unit mismatch can produce a bar that looks plausible while describing the wrong distance.
Choose a useful length
Use a distance that gives you readable divisions at the final sheet size. A very short bar leaves little room for numbers; an unusually long bar can crowd the drawing title. The maker accepts printed spans from fifteen to four hundred millimetres. If your settings fall outside that range, change the represented distance or choose another drawing scale.
Chosen width mode keeps your represented distance and computes the scale that fits it into that width. The measurement line and optional caption show this resulting ratio. Use that mode when matching an already resized drawing. Measure a known length first, then confirm that both the view and the bar use the same relationship between paper and real distance.
Resizing and export
A graphic scale continues to describe the drawing after resizing when you scale the drawing and bar together by the same amount. A written ratio alone cannot track that change. Keep the bar grouped with its view during page layout, and revise a scale caption if the final ratio changes. Different view scales on one sheet need separate bars.
SVG and PDF preserve millimetre dimensions. Print at actual size and disable fit to page when checking a true length. PNG uses transparent pixels at the selected density, so set its placed width yourself. DXF imports as paper millimetres. Skiaform templates use the same drafting style for line work and labels across a sheet.
FAQ
Is this scale bar for architectural drawings?
Yes, you can use it beside plans, sections, elevations and site drawings. Set the distance and scale to match the particular view.
How long is ten metres at 1:100?
The printed bar is one hundred millimetres long. That is ten centimetres when printed at actual size.
Does a scale bar survive a resized PDF?
It remains valid if the drawing and bar resize together by the same factor. Check the numerical caption separately because a written ratio may need updating.
Does chosen width keep the selected scale?
Chosen width calculates a new scale from your distance and width. The measurement line and caption display that resulting ratio.
How should I place a PNG at the correct size?
Use the canvas width recorded in the downloaded SVG or the measurement line plus the stated margins. For physical sizing, SVG or PDF is easier because those formats carry millimetre dimensions.
Keep up with Skiaform
Occasional notes about drawing tools and templates.